Top Tips To Help Stop Your 3D Prints From Warping

You’ve got a warped 3D print on your hands if some section of your printed object starts to curve upwards. The issue arises because the temperature fluctuations between extruded plastic layers are too great. As a result, tension builds within the model, and when it becomes too high, lower layers begin to pull or lift, causing a warp. Here are some top tips to help stop your 3D prints from warping.

Regulate Temperature

The most important factor in preventing warping is temperature, which includes not only the filament but also the bed and the surrounding air. Here are some suggestions for keeping the ideal temperature:

• Use a heated bed to assist the model’s temperature stay consistent. A hot build plate aids in bed adhesion as well. The filament manufacturer will usually provide recommended bed temperatures.
• Use an enclosed print chamber to keep the temperature consistent during the printing process.
• Close the windows and doors to maintain the space at a comfortable temperature. (Just keep in mind that you’ll still need to breathe!) Prevent any chilly air from coming into contact with the 3D print.

Use Adhesives

As previously said, strengthening the adherence of your bottom layer to the print bed may be sufficient to keep the corners from lifting. This usually entails smearing something sticky on the bed before beginning the print. It’s often a good idea to test any adhesive on a small part first to make sure it’s not too strong. You don’t want it to be so stuck that removing it damages the part (or perhaps your bed)! Hairspray and a PVA glue stick are two of the greatest adhesives we can recommend!

Change Your Slicer’s Settings

Finally, there are certain slicer settings that can help keep the print from warping and keep it in place on the bed. Lowering your print speed is one suggestion that might work. You would be surprised how often slower print speeds can help fix the most obstinate printing problems, such warping and curling. Remember to adjust the nozzle temperature as well. In your slicer, you may also make a brim or skirt. A brim is one or more extra layers of outlines attached to the edge of the base, whereas a skirt is a perimeter offset from the edge of the portion. This increases the grip on the build surface by giving your model a bigger bottom area.

We hope this article has helped you figure out some of the top tips to help stop your 3D prints from warping! If you are having any other issues with your prints, be sure to understand the most common 3D printing issues and how you can fix them! Learning this information will make all your future printing endeavors much easier!